Yes, I can help you to confirm a hitch receiver that does fit your 2021 Nissan Rogue Sport. However, the Curt Trailer Hitch Receiver item # C57HR does not fit the 2021 Rogue Sport. That hitch receiver fits the standard 2021 Nissan Rogue. You will need the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" item # C13377. This hitch has a 2" receiver we do not offer a 1 1/4" receiver for your year and model Nissan so you will need an adapter. I recommend the Brophy Hitch Reducer item... view full answer...
The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56397 that fits your 2017 Nissan Rogue Sport will hang out of the rear hatch of your vehicle as you mentioned was the case on your BMW X3.
I have added photo which shows how the connector will rest when you are using it; when you are not using it you can simply store it wherever is most convenient for you inside the hatch of your '17 Rogue Sport. view full answer...
There are two hitch options for the 2017 Nissan Rogue Sport, Curt Class III 2" hitch part # C13377 and Draw-Tite Class III 2" hitch part # 76177 which are almost exactly the same. The installation, weight capacity and concealed cross tube design are the same for both hitches. The only real difference is that the Curt option is assembled in the USA which is why I recommend it. I have attached an installation video for your reference.
If you need wiring, I recommend Tekonsha T-One Vehicle... view full answer...
When installing Draw-Tite trailer hitch # 76177 on your 2017 Nissan Rogue Sport you will use the included hardware on the driver's side. There are 2 bolts and 2 blocks that will get fed into the frame. The threaded ends will exit through 2 of the holes in your picture, through the holes in the hitch, and secured with washers and nuts.
If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one... view full answer...
Good question, though the construction of the Curt hitch for your 2019 Nissan Rogue Sport won't affect its ability to carry your bike racks and four bikes. the Curt # C13377 hitch has a tongue weight capacity of 525 lbs, which is well over the 200 lbs or so you mentioned so they are designed to handle well over double the amount of weight of your bikes and bike rack.
We have two hitches that install exactly the same, and have the same amount of ground clearance and bumper clearance, so... view full answer...
There is not a replacement hitch pin for the old Reese Outfitter bike rack, and the hitch pin you mentioned won't work with the rack, so if you are missing yours, or the hitch pin is damaged to the point that you can't use it with the Outfitter then you would need a replacement rack. The good news is there is a similar, cost-friendly option for you:
- Swagman 4 Bike Rack for 2" Hitches # S64940.
The # S64940 4-bike rack is easy to use, with simple rotating cradles. It also comes with... view full answer...
That's an excellent question, and while there is a maximum crossbar thickness, there isn't actually a minimum crossbar thickness for the Swagman Fork Down Roof Mounted Bike Carrier # S64710.
There is a maximum crossbar thickness because the mounting hardware uses clamps with U-bolts that are only so wide, but so long as your crossbars are less than 3 inches in width, the Swagman Fork Down Roof Mounted Bike Carrier # S64710 will easily mount right to your crossbars. view full answer...
For your 2019 Nissan Rogue Sport there are only 2 inch hitches available like the Curt # C13377 which is a really great choice. Typically we get requests for the 2 inch size on vehicles that only have 1-1/4 inch sizes available so this is an interesting change of pace! So what you can do is use a hitch reducer like # HT02 to reduce your 2 inch hitch size down to a 1-1/4 inch and you'd be set. view full answer...
The etrailer hitch part # e79YR that you referenced is a confirmed fit for your 2017 Nissan Rogue Sport and since it has a tongue weight (vertical weight) capacity of 525 lbs it would easily be able to carry the weight of the spare wheel and tire you mentioned that weighs 55 lbs. view full answer...
The GearDeck 17 Enclosed Cargo Carrier item # H00604 fits a standard 2" x 2" hitch receiver. If your 2019 Nissan Rogue Sport has a 2" receiver like the Curt item # C13377, this cargo carrier will fit your vehicle. This lockable carrier is 46-1/2" x 24" x 25" and has a 300 lbs capacity. view full answer...
Yes, your 2021 Nissan Rogue Sport SV is 100 percent compatible with the Curt hitch you asked about, with the correct fit being the following part number:
- Curt Trailer Hitch Receiver # C13377
The # C13377 doesn't actually use screws to install on your '21 Rogue Sport, they are Grade 8 bolts, along with the nuts and washers (all of which is included with the hitch); but yes, that is all that is needed in regards to hardware. It will bolt onto the frame and give you a 2 inch hitch with... view full answer...
The 2 inches of overhang at the rear of the camper when you use MaxxFan Deluxe Roof Vent w/ 12V Fan and Thermostat part # MA00-05100K will be fine when you are pulling the camper. You would just want to keep the the extra 2 inches of overhang in mind when you park or store the camper in an enclosed space so you don't end up bumping it into something. view full answer...
The etrailer Class III hitch you mentioned, part # e79YR is a fit for your 2019 Nissan Rogue Sport. We estimate that an experienced installer should be able to complete the install in about an hour. Any trusted mechanic should be able to handle the installation with no problem. What you'll pay for the installation will depend on the going rate for hourly ship labor in your area. I've linked you to some installation videos that I hope you'll find helpful.
If you'll be towing a small trailer,... view full answer...
For a light that is similar to the Optronics MC44RB1 but has a 2-wire design you will need the following:
- Optronics LED Trailer Clearance or Side Marker Light w/ Reflex Reflector - 6 Diodes - Red Lens # MCL44RB
This is the same light, with exactly the same dimensions and mounting hole spacing as the MC44RB1, with the only differences being that this is an LED light instead of incandescent, and that it is a 2-wire light so it's exactly what you're looking for. view full answer...
For your 2022 Nissan Rogue Sport with a naked roof, I'd recommend going with the Yakima JetStream Crossbars # Y00425 with the BaseLine Towers for Yakima Crossbars # Y28TR, and the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06123 & # Y06170.
These crossbars will attach to your vehicle's naked roof and provide you a mounting point for a kayak carrier like the Yakima JayLow Kayak Roof Rack w/ Tie-Downs # Y04073.
The crossbars # Y28TR measure 50" long x 2-3/4" wide, 1-1/8" tall... view full answer...
To install the etrailer trailer hitch receiver, part # e79YR, on a 2017 Nissan Rogue Sport there is no cutting of the bumper or fascia needed. You will need to lower the exhaust temporarily to get the hitch in place and remove the tow hooks, if you have them. The tow hooks will be permanently removed. You also need to enlarge an access hole for the hitch to be mounted. view full answer...
Yes, the Inno rack does indeed fit your 2019 Nissan Rogue Sport with a bare roof, and you'll need a few parts to make the crossbars you listed fit, which are the feet that mount the crossbars, and the fit kit that the feet go on. So, the exact parts you need for the Inno roof rack on your 2019 Nissan Rogue Sport with a bare roof are the following:
- Inno Aero Crossbars # INXB138-2
- Inno Through Feet for Aero Crossbars # INXS250
- Fit Kit # INK764
I verified all of this with Yakima... view full answer...
The short answer is that if there's a demand for a trailer hitch for a new vehicle our hitch manufacturers will make one. We have to recommend you stick with any guidelines listed in the owners manual for the vehicle but some people are still going to tow with the vehicle or others may install a bike rack into the hitch.
The etrailer hitch part # e79YR is a great hitch confirmed as a fit for your 2018 Nissan Rogue Sport. Only the hitch opening hangs below the rear bumper which means it's... view full answer...
Yes, we have a hitch for your 2021 Nissan Rogue Sport. The Curt Trailer Hitch Receiver # C13377 is confirmed to fit your 2021 Nissan Rogue Sport. This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a 2" receiver opening which is the most common size used for hitch mounted accessories such as bike racks, cargo carriers and ball mounts.
If you plan to do any towing you can round out a tow package for your 2021 Nissan Rogue Sport by picking up the... view full answer...
If the bolt won't go in the weld nut of the Curt Trailer Hitch Receiver # C13377, the issue is almost certainly that the weld nuts are dirty and thus stopping the bolt from catching.
What you'll want to do is clean the weld nut with a brush and lubricant, and I have added a link below to a help article which details exactly how to accomplish this. view full answer...